A. ARTICOLE cotate ISI

1. TECHNOLOGICAL RESEARCHES CONCERNING A DECREASE IN THE LOSSES DUE TO THE OXIDATION OF REMELTED SCRAP FROM ALUMINIUM ALLOYS

By: Butnariu, Ilie; Butnariu, Ioana; Butnariu, Dana Edited by: Taylor, JA; Grandfield, JF; Prasad, A Conference: 11th International Conference on Aluminium Cast House Technology Location: CAST CRC, Gold Coast, AUSTRALIA Date: SEP 13-16, 2009 Sponsor(s): Aluminium Ind, ALUMINIUM CAST HOUSE TECHNOLOGY XIBook Series: Materials Science Forum Volume: 630 Pages: 71-74 Published: 2010

2. STUDIES AND RESEARCHES ON ACHIEVEMENT STRENGTH PARAMETERS AND TECHNOLOGICAL PARAMETERS OF METAL LAYER OBTAINED BY ARC THERMAL SPRAYING  

By: Butnariu, Ilie; Ruica, Florentin Mihai; Cernaianu-Stoianovici, Alexandru-Anton; et al. METALURGIA INTERNATIONAL Volume: 15 Issue: 8 Pages: 16-18 Published: 2010

3. THE INFLUENCE OF AGGLOMERATION PROCESS OPTIMIZATION OF IRON ORE IN THE DEVELOPMENT OF IRON IN BLAST FURNACE  

By: Butnariu, Ilie; Ruica, Florentin Mihai METALURGIA INTERNATIONAL Volume: 15 Issue: 6 Pages: 22-24 Published: 2010

4. THE PROCESSING TECHNOLOGY OF COATING BY THERMAL SPRAYING ARC AT PLANE BEARING AND TREES FROM VARIOUS PARTS  

By: Butnariu, Ilie. METALURGIA INTERNATIONAL Volume: 15 Special Issue: 8 Pages: 26-29 Published: 2010

5. RESEARCHES ON GROWTH PROPERTIES OF ATTRITION OF ALLOYED STEEL USED IN METAL PARTS USED IN HIGHTEMPERATURE CORROSIVE ENVIROMENTS  

By: Butnariu, Ilie; Stoianovici-Cernaianu, Alexandru-Anton; Ruica, Florentin Mihai; et al. METALURGIA INTERNATIONAL Volume: 15 Issue: 7 Pages: 31-33 Published: 2010

6. ASPECTS OF THE THERMAL SPRAY PROCESS ARC  

By: Butnariu, Ilie; Ruica, Florentin-Mihai; Ruica, Iulian-Marius. METALURGIA INTERNATIONALVolume: 15 Issue: 9 Pages: 51-54 Published: 2010

7. RESEARCHES CONCERNING THE INFLUENCE SINTER IN THE BLAST FURNACE ON MELTING ZONE POSITION

By: Butnariu, Ilie; Ruica, Florentin Mihai. METALURGIA INTERNATIONALVolume: 15 Issue: 5 Pages: 52-56 Published: 2010

8. RESEARCH ON ACHIEVEMENT, AND INVESTIGATION PERFORMANCE CHARACTERIZATION OF COMPOSITE MATERIALS

By: Butnariu, Ilie. METALURGIA INTERNATIONAL Volume: 15 Issue: 10 Pages: 72-76 Published: 2010

9. MODELS USED IN REFINING PROCESS OF TREATED STEELS WITH RARE GASES AND SYNTHETIC SLAGS

By: Butnariu, Ilie METALURGIA INTERNATIONALVolume: 15 Issue: 10 Pages: 77-79 Published: 2010

10. MATHEMATICAL MODELS USED FOR COMPUTER SIMULATION FOR SOLIDIFICATION PROCESSES OF STEEL IN CHILL

By: Butnariu, Ilie. METALURGIA INTERNATIONAL Volume: 15 Issue: 11 Pages: 79-81 Published: 2010

11. OPERATING CHARACTERIZATION OF PRODUCT SUPPORT BODY COUPLES-COATING AND SUPERFICIAL LAYER

By: Butnariu, Ilie; Florescu, Danut. METALURGIA INTERNATIONAL Volume: 15 Issue: 11 Pages: 82-86 Published: 2010

12. DEVELOPMENT AND EXPERIMENTATION WITH MULTIFACTORIAL INTERVENTION MODELS FOR PREVENTION AND REDUCTION EVENTS FOR CIRCULATION  

By: Butnariu, Ilie; Constantin, Nicolae; Florescu, Danut. METALURGIA INTERNATIONAL Volume: 15 Issue: 9 Pages: 85-87 Published: 2010

13. RESEARCH ON INFLUENCE OF STRUCTURE ON PHYSICAL AND MECHANICAL PROPERTIES OF STEEL

By: Butnariu, Ilie; Florescu, Danut. METALURGIA INTERNATIONAL Volume: 15 Issue: 11 Pages: 87-90 Published: 2010

14. THE EFFICIENCY AT INDUSTRIAL SCALE OF A THERMODYNAMIC MODEL FOR DESULPHURIZATION OF ALUMINIUM KILLED STEELS USING SLAGS IN THE SYSTEM CaO-MgO-Al2O3-SiO2  

By: Nita, P. S.; Butnariu, I.; Constantin, N. REVISTA METALURGIA Volume: 46 Issue: 1 Pages: 5-14 Published: JAN-FEB 2010

15. STUDIES ON THE EMERGENCE TENSIONS IN COATINGS TO THE REQUEST OPERATING

By: Butnariu, Ilie; Constantin, Nicolae; Florescu, Danut. METALURGIA INTERNATIONAL Volume: 15 Issue: 9 Pages: 47-50 Published: 2010

16. THERMODYNAMICS OF INTERACTIONS IN Al-K2TiF6 SYSTEM

By: Moldovan, Petru; Butu, Mihai; Popescu, Gabriela; et al. REVISTA DE CHIMIE Volume: 61 Issue: 9 Pages: 828-832 Published: SEP 2010

17. THERMODYNAMICS OF INTERACTIONS IN Al-KBF4 SYSTEM

By: Moldovan, Petru; Butu, Mihai; Popescu, Gabriela; et al. REVISTA DE CHIMIE Volume: 61 Issue: 9 Pages: 832-836 Published: SEP 2010

18. THE INFLUENCE OF THE TECHNOLOGICAL PARAMETERS ON THE EFFICIENCY OF THE METAL MELTS ALLOYING PROCESS BY PULVERULENT MATERIAL INJECTION

By: Geanta, V.; Stefanoiu, R.; Voiculescu, I.; et al. JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Volume: 13 Issue: 7-8 Pages: 921-925 Published: JUL 2011

19. INFLUENCE ON CHEMICAL COMPOSITION OF FeCrAl ALLOYS ON THE MICROHARDNESS

By: Geanta, Victor; Voiculescu, Ionelia; Stefanoiu, Radu; et al. METALURGIA INTERNATIONAL Volume: 16 Issue: 5 Pages: 153-156 Published: 2011

20. STUDIES AND RESEARCHES CONCERNING THE PRESENCE OF IRON IN SECONDARY ALUMINIUM MELTINGS AND VALORIFICATION OF SOME ALUMINIUM WASTE

By: Butnariu, Ilie; Butnariu, D.; Butnariu, I. Edited by: Dieringa, H; Hort, N; Kainer, KU Conference: 5th International Conference on Light Metals Technology Location: Luneburg, GERMANY Date: JUL 19-22, 2011 LIGHT METALS TECHNOLOGY VBook Series: Materials Science Forum Volume: 690 Pages: 250-253 Published: 2011

21. STUDIES AND RESEARCHES ON QUALITY IMPROVEMENT OF CONTINUOUSLY CAST BILLETS UNALLOYED AND LOW ALLOYED STEELS  

By: Butnariu, Ilie; Angelescu, Dumitru; Florescu, Danut. METALURGIA INTERNATIONAL Volume: 16 Issue: 6 Pages: 33-37 Published: 2011

22. REQUIREMENTS IN SERVICE IMPOSED TO MATERIALS FOR FRICTION COUPLINGS

By: Butnariu, Ilie; Cernaianu, Antoniu; Angelescu, Dumitru. METALURGIA INTERNATIONAL Volume: 16 Issue: 6 Pages: 38-41 Published: 2011

23. THE MECHANISM AND KINETICS OF TIB2 NANOPARTICLES AND MICROPARTICLES FORMATION VIA ALUMINOTHERMIC REACTION

By: Butu, Mihai; Moldovan, Petru; Usurelu, Emilia; et al. REVISTA DE CHIMIE Volume: 62 Issue: 7 Pages: 723-726 Published: JUL 2011

24. HEAT TREATMENTS OF DIFFERENT MAGNESIUM ALLOYS

By: Ghiban, Brandusa; Moldovan, Petru; Popescu, Gabriela; et al. METALURGIA INTERNATIONAL Volume: 16 Issue: 4 Pages: 13-16 Published: 2011

25. POWDER METALLURGY PROCESSING OF Al/TiAl(3)+Al(2)O(3)

By: Apostolescu, Ioana; Moldovan, Petru; Popescu, Gabriela Edited by: Chicinas, I; Brandusan, L. Conference: 4th International Conference on Powder Metallurgy, RoPM 2009 Location: Tech Univ Cluj-Napoca, Craiova, ROMANIA Date: JUL 08-11, 2009 Sponsor(s): European Powder Met Assoc; Minist Educ, Res & Innovat; Natl Univ Res Council; Hotel BAVARIA; Domeniul Coroanei Segarcea; Grupul Scolar Marina Orsova; Hotel PLAZA; SC SINTEROM SA; NOVARTIS SA; NULKA SRL; Papetaria BADENIS TRADING SRL; Editura RISOPRINT; Primaria Municipiului Craiova; RAT SARESEARCHES IN POWDER METALLURGY Book Series: Materials Science Forum Volume: 672 Pages: 215-218 Published: 2011

26. CRYSTAL SIZE DETERMINATION OF Al-Mn MASTER ALLOY

By: Usurelu-Cristea, Adina; Iacob, Gheorghe; Popescu, Gabriela; et al. METALURGIA INTERNATIONAL Volume: 16 Issue: 4 Pages: 145-148 Published: 2011

27. HEAT TREATMENTS OF DIFFERENT MAGNESIUM ALLOYS

By: Ghiban, Brandusa; Moldovan, Petru; Popescu, Gabriela; et al. METALURGIA INTERNATIONAL Volume: 16 Issue: 4 Pages: 13-16 Published: 2011

28. STUDIES ON MATERIALS USED IN PRESENT FOR THERMAL SPRAYING PROCESS AND THEIR PROPERTIES

By: Butnariu, Ilie; Cernaianu, Alexandru Antoniu Stoianovici. METALURGIA INTERNATIONAL Volume: 17 Issue: 12 Pages: 93-95 Published: 2012

29. COMPARATIVE ANALYSIS OF MATERIALS USED FOR ANTIFRICTION IN METALIZATION WITH ELECTRIC ARC UPON REQUEST OPERATING RESULT

By: Butnariu, Ilie; Cernaianu, Alexandru Antoniu Stoianovici METALURGIA INTERNATIONAL Volume: 17 Issue: 12 Pages: 96-98 Published: 2012

30. INCREASE THE INGOTS QUALITY CAST IN VACUUM

By: Mincu, Valentin; Negru, Malin; Constantin, Nicolae. Edited by: Nicoara, M; Raduta, A; Opris, C. Conference: 4th International Conference on Advanced Materials and Structures (AMS 2011) Location: Timisoara, ROMANIA Date: OCT 27-28, 2011 Sponsor(s): POLITEHN Fdn. ADVANCED MATERIALS AND STRUCTURES IVBook Series: Solid State Phenomena Volume: 188 Pages: 339-345 Published: 2012

31.PHYSICAL AND CHEMICAL CHARACTERISTICS OF RAW MATERIALS USED IN BLAST FURNACES IN VIEW OF AN IMPROVED EFFICIENCY  

By: Burlacu, Jan Marcelius; Constantin, Nicolae METALURGIA INTERNATIONAL Volume: 17 Issue: 5 Pages: 50-54 Published: 2012

32. ALTERNATIVE TECHNOLOGIES OF DRYING COMBUSTIBLE WASTE IN ORDER TO EFFICIENTLY CAPITALIZE IT

By: Burlacu, Jan Cornelius; Constantin, Nicolae METALURGIA INTERNATIONAL Volume: 17 Issue: 4 Pages: 161-164 Published: 2012

33. RESEARCH ON EXPERIMENTAL QUALITATIVE CHARACTERISTICS OF FINE-GRAINED IRON ORES

By: Burlacu, Jan; Constantin, Nicolae METALURGIA INTERNATIONAL Volume: 17 Issue: 4 Pages: 175-179 Published: 2012

34. EXPERIMENTAL RESEARCH ON PNEUMATIC CONVEYING REACTION TO IRON ORE FINE-GRAINED

By: Burlacu, Jan; Constantin, Nicolae METALURGIA INTERNATIONAL Volume: 17 Issue: 4 Pages: 184-188 Published: 2012

35. THERMODYNAMICS AND MECHANISM OF METALOTHERMIC REDUCTION OF MOLTEN SALTS

By: Dragut, Dumitru Valentin; Moldovan, Petru; Butu, Mihai. REVISTA DE CHIMIE Volume: 63 Issue: 9 Pages: 925-928 Published: SEP 2012

36. CHARACTERISATION OF A NEW Cu-Fe3O4 NANOCOMPOSITE

By: Predescu, A.; Vladutiu, L. M.; Moldovan, P.; et al. DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES Volume: 7 Issue: 3 Pages: 1189-1197 Published: JUL-SEP 2012

37. MECHANOCHEMICAL ACTIVATION OF COPPER CONCENTRATE AND THE EFFECT ON OXIDATION OF METAL SULPHIDES

By: Onisei, Silviana; Badilita, Viorel; Stoiciu, Florin; et al. REVISTA DE CHIMIE Volume: 63 Issue: 6 Pages: 591-597 Published: JUN 2012

38. SYNTHESIS OF INORGANIC POLYMERS USING FLY ASH AND PRIMARY LEAD SLAG

By: Onisei, S.; Pontikes, Y.; Van Gerven, T.; et al. JOURNAL OF HAZARDOUS MATERIALS Volume: 205 Pages: 101-110 Published: FEB 29 2012

39. IN SITU ALUMINIUM COMPOSITES PRODUCED VIA A CASTING ROUTE

By: Dragut, Dumitru Valentin; Moldovan, Petru; Butu, Mihai. METALURGIA INTERNATIONAL Volume: 17 Issue: 12 Pages: 10-12 Published: 2012

40. REVIEW ANALYSIS WITH SOME EXPERIMENTAL RESULTS IN THE CHARACTERIZATION OF WASTE PRINTED CIRCUIT BOARDS (WPCBs) BY PHYSICAL PROCESS FOR METALS CLASSIFICATION AND PRECIOUS METALS RECOVERY

By: Birloaga, Ionela; De Michelis, Ida; Buzatu, Mihai; et al. METALURGIA INTERNATIONAL Volume: 17 Issue: 12 Pages: 23-28 Published: 2012

41. INFLUENCE OF THE CHEMICAL COMPOSITION ON THE MICROSTRUCTURE AND MICROHARDNESS OF AlCrFeCoNi HIGH ENTROPY ALLOY

By: Voiculescu, Ionelia; Geanta, Victor; Stefanoiu, Radu; et al. REVISTA DE CHIMIE Volume: 64 Issue: 12 Pages: 1441-1444 Published: DEC 2013

42. EFFECT OF THERMAL REGIME ON THE MICROSTRUCTURE AND MICROHARDNESS OF STEELS MICROALLOYED WITH Nb AND V

By: Geanta, V.; Voiculescu, I.; Stefanoiu, R.; et al. JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Volume: 15 Issue: 11-12 Pages: 1457-1462 Published: NOV-DEC 2013

43. PROCESSING AND CHARACTERIZATION OF ADVANCED MULTI-ELEMENT HIGH ENTROPY MATERIALS FROM AlCrFeCoNi SYSTEM

By: Geanta, V.; Voiculescu, I.; Stefanoiu, R.; et al. OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS Volume: 7 Issue: 11-12 Pages: 874-880 Published: NOV-DEC 2013

44. CHARACTERISATION OF WELD DEPOSITS USING AS FILLER METAL A HIGH ENTROPY ALLOY

By: Voiculescu, I.; Geanta, V.; Vasile, I. M.; et al. JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Volume: 15 Issue: 7-8 Pages: 650-654 Published: JUL-AUG 2013

45. IN SITU REACTION INFLUENCE ON HYBRID ALUMINUM/TITAN ALUMINIDE AND ALUMINA COMPOSITE HARDNESS

By: Csaki, Ioana; Popescu, Gabriela; Stefanoiu, Radu REVISTA DE CHIMIE Vol: 64 Issue: 7 Pages: 693-696 Published: JUL 2013

46. RESEARCHES REGARDING THE ESTABLISHMENT OF THE OPTIMAL CHEMICAL COMPOSITION OF THE CENTRIFUGAL CRUSHERS RETENTION SILLS

By: Geanta, Victor; Voiculescu, Ionelia; Stefanoiu, Radu; et al. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 19-23 Published: 2013

47. IMPROVEMENT OF REFRACTORY LINING LIFETIME OF COSS-EBT FURNACE THROUGH SLAG REGIME MANAGEMENT AT MECHEL OTELU ROSU

By: Geanta, Victor; Preda, Sorin; Stefanoiu, Radu. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 43-47 Published: 2013

48. STUDIES AND RESEARCHES ON LIQUID STEEL TEMPERATURE EVOLUTION AT INERT GAS INJECTION

By: Stefanoiu, Radu; Geanta, Victor; Voiculescu, Ionelia. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 48-51 Published: 2013

49. RESEARCHES REGARDING THE OBTAINING OF THE ELECTRODE FOR SPOT WELDING

By: Voiculescu, Ionelia; Geanta, Victor; Vasile, Ion Mihai; et al. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 52-55 Published: 2013

50. NEW MULTICONVOLUTIONAL APPROACH FOR MEASUREMENT UNCERTAINTY ESTIMATION. CASE STUDY FOR VICKERS HARDNESS TEST

By: Pencea, Ion; Sfat, Catalin; Geanta, Victor; et al. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 2 Pages: 57-62 Published: 2013

51. EXPERIMENTS AT THE MOUTH OF WIND TO VERIFY PROPOSED SOLUTIONS ON IMPROVING COAL DUST COMBUSTION INSTILLED IN BLAST FURNACE

By: Oancea, Violeta Florentina; Constantin, Nicolae; Hritac, Mircea. METALURGIA INTERNATIONAL Volume: 18 Issue: 4 Pages: 47-50 Published: 2013

52. EXPERIMENTAL RESEARCH ON PHYSIO-CHEMICAL PROPERTIES OF FERROUS FINE WASTE AT EXISTING ECONOMIC AGENTS WITH STEEL PROFILE

By: Mihaiu, Alina Cristina; Constantin, Nicolae. METALURGIA INTERNATIONAL Vol: 18 Issue: 4 Pages: 51-54 Published: 2013

53. PHYSICAL MODEL FOR THE SIMULATION OF GAS DYNAMIC SPRAYING PROCESS OF COAL DUST BLOWING INTO THE FURNACE

By: Oancea, Violeta Florentina; Constantin, Nicolae; Hritac, Mircea. METALURGIA INTERNATIONAL Volume: 18 Issue: 4 Pages: 55-58 Published: 2013

54. EXPERIMENTAL RESEARCH ON THE CHARACTERISTICS OF REDUCIBILITY AND MECHANICAL STRENGTH OF FERROUS AGGLOMERATES

By: Vilcea, Elena; Tudor, Mihai; Constantin, Nicolae. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 118-121 Published: 2013

55. ANALYSIS OF THE TECHNOLOGICAL OPPORTUNITIES TO REDUCE OXIDES OF IRON FROM ORE AND FERROUS WASTES WITH FINE GRAIN

By: Tudor, Mihai; Vilcea, Elena; Stanasila, Octavian; et al. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 126-130 Published: 2013

56. COMPARATIVE ANALYSIS OF THE GRANULAR PROCESS DYNAMICS AND DEM TYPE NUMERICAL SIMULATION OF RAW MATERIALS USED IN THE AGGLOMERATION PROCESS

By: Mogos, Paul Petrus; Constantin, Nicolae. METALURGIA INTERNATIONAL Vol: 18 Issue: 4 Pages: 200-205 Published: 2013

57. ANALYTICAL METHODS FOR FAST DETERMINATION OF CONSUMPTION OF COKE IN BLAST FURNACES, USING VARIOUS FUELS AUXILIARY

By: Constantin, Claudiu; Constantin, Nicolae. METALURGIA INTERNATIONAL Volume: 18 Issue: 2 Pages: 5-7 Published: 2013

58. THE APPLICATION OF STATISTICAL AND MATHEMATICAL METHODS OF ANALYSIS TO REAL DATA PROCESSING OPERATION OF A BLAST FURNACE

By: Constantin, Claudiu; Constantin, Nicolae. METALURGIA INTERNATIONAL Volume: 18 Issue: 2 Pages: 8-11 Published: 2013

59. SOME CHARACTERISTICS OF VERMICULITE MINERAL

By: Ittu, Sinziana; Constantin, Nicolae. METALURGIA INTERNATIONAL Volume: 18 Issue: 2 Pages: 73-76 Published: 2013

60. CALCULATED THEORETICAL HARDNESS FROM CHEMICAL DATA FOR BORON NITRIDE NANOTUBES

By: Petrescu, Mircea-Ionut; Ghiban, Brandusa; Ghiban, Nicolae, et al. REVISTA DE CHIMIE Volume: 64 Issue: 10 Pages: 1151-1155 Published: OCT 2013

61. STUDY CONCERNING PBO SOLUBILITY IN NaOH SOLUTION FOR THE TREATMENT OF SULFATE-OXIDE PASTES OBTAINED FROM DISMANTLING USED LEAD-ACID BATTERIES

By: Badanoiu, Genica; Buzatu, Traian; Buzatu, Mihai, et al. REVISTA DE CHIMIE Volume: 64 Issue: 9 Pages: 1004-1010 Published: SEP 2013

62. SIMULTANEOUS RECOVERY OF ZN AND MNO2 FROM USED BATTERIES, AS RAW MATERIALS, BY ELECTROLYSIS

By: Buzatu, Mihai; Saceanu, Simona; Ghica, Valeriu Gabriel; et al. WASTE MANAGEMENT Volume: 33 Issue: 8 Pages: 1764-1769 Published: AUG 2013

63. STUDY ON THE INFLUENCE OF VARIOUS FACTORS IN THE HYDROMETALLURGICAL PROCESSING OF WASTE PRINTED CIRCUIT BOARDS FOR COPPER AND GOLD RECOVERY

By: Birloaga, Ionela; De Michelis, Ida; Ferella, Francesco, et al. WASTE MANAGEMENT Volume: 33 Issue: 4 Pages: 935-941 Published: APR 2013

64. SUITABILITY OF GRANULATED LEAD SLAG FOR VALORISATION

By: Talpos, Emilia; Buzatu, Mihai METALURGIA INTERNATIONAL Volume: 18 Issue: 4 Pages: 22-27 Published: 2013

65. SUITABILITY OF AIR-COOLED LEAD SLAG FOR VALORISATION

By: Talpos, Emilia; Buzatu, Mihai METALURGIA INTERNATIONAL Volume: 18 Issue: 4 Pages: 28-31 Published: 2013

66. OBTAINING OF AlMgMnCr WROUGTH ALLOY BY ALLOYING WITH AlMn NANOSTRUCTURED MASTER ALLOY

By: Usurelu-Cristea, Adina; Popescu, Gabriela; Dumitru, Mitrica; et al. METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 100-103 Published: 2013

67. STRUCTURAL EVOLUTION AND MORPHOLOGICAL CHANGES OF Al/Al2O3/Gr COMPOSITES

By: Popescu, Gabriela; Iacob, Gheorghe; Buzatu, Mihai METALURGIA INTERNATIONAL Volume: 18 Special Issue: 1 Pages: 104-107 Published: 2013

68. RESEARCHES REGARDING THE INFLUENCE OF CHEMICAL COMPOSITION ON THE PROPERTIES OF AlxCrFeCoNi ALLOYS

By: Stefanoiu, Radu; Geanta, Victor; Voiculescu, Ionelia; et al. REVISTA DE CHIMIE Volume: 65 Issue: 7 Pages: 819-821 Published: JUL 2014

69. REACTIVE VACUUM INFILTRATION ALUMINIUM BASED COMPOSITE HARDNESS VARIATION WITH IN SITU REACTION COMPLETION LEVEL

By: Csaki, Ioana; Popescu, Gabriela; Stefanoiu, Radu. REVISTA DE CHIMIE Vol: 65 Issue: 2 Pages: 206-209 Published: FEB 2014

70. STAINLESS STEELS WITH BIOCOMPATIBLE PROPERTIES FOR MEDICAL DEVICES

By: Geanta, Victor; Voiculescu, Ionelia; Stefanoiu, Radu; et al. Edited by: Antoniac, I; Cotrut, CM; Antoniac, A. Conference: 5th international Conference on Biomaterials, Tissue Engineering and Medical Devices (BiomMedD 2012) Location: Constanta, ROMANIA Date: AUG 29 - SEP 01, 2012 BIOMMEDD VBook Series: Key Engineering Materials Volume: 583 Pages: 9-15 Published: 2014

71.OBTAINING AND CHARACTERIZATION OF BIOCOMPATIBLE Co-Cr AS CAST ALLOYS

By: Geanta, Victor; Voiculescu, Ionelia; Stefanoiu, Radu; et al. Edited by: Antoniac, I; Cotrut, CM; Antoniac, A. Conference: 5th international Conference on Biomaterials, Tissue Engineering and Medical Devices (BiomMedD 2012) Location: Constanta, ROMANIA Date: AUG 29-SEP 01, 2012 BIOMMEDD VBook Series: Key Engineering Materials Volume: 583 Pages: 16-21 Published: 2014

72. EXPERIMENTAL RESEARCHES ON THE GRAPHITE PARTICLES DISSOLUTION DURING INJECTION PROCESS IN FERROUS METALLIC MELTS

By: Geanta, Victor; Stefanoiu, Radu; Voiculescu, Ionelia REVISTA DE CHIMIE Vol: 65 Issue: 1 Pages: 94-97 Published: JAN 2014

73. RECOVERY OF ZINC AND MANGANESE FROM SPENT BATTERIES BY REDUCTIVE LEACHING IN ACIDIC MEDIA

By: Buzatu, M.; Saceanu, S.; Petrescu, M. I.; et al. JOURNAL OF POWER SOURCES Vol: 247 Pag: 612-617 Published: Feb 1 2014

74. THERMOELECTRIC POWER IN LIQUID COMPOSITIONS RICHER IN S THAN Tl2S SEMICONDUCTOR COMPOUND

By: Adam, Stefan Alexandru; Buzatu, Mihai; Petrescu, Mircea Ionut UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN-SERIES A-APPLIED MATHEMATICS AND PHYSICSVolume: 76 Issue: 4 Pages: 227-238 Published: 2014

75. ELECTRON MICROSCOPY RESEARCHES ON THE MICROSTRUCTURE OF INCONEL 718 ALLOY

By: Ghica, Valeriu Gabriel; Buzatu, Mihai; Iacob, Gheorghe; et al. REVISTA DE CHIMIE Volume: 65 Issue: 1 Pages: 105-109 Published: Jan 2014

76. INFLUENCE OF THE CHEMICAL COMPOSITION ON THE MECHANICAL PROPERTIES OF FORGED MICROALLOYED STEELS.

By: Geanta, V., Tacã, M., Daisa, D.D., Voiculescu, I., Stefãnoiu, R., Constantinescu, D.M., Savastru, D. JOURNAL OF OPTOELEC- TRONICS AND ADVANCED MATERIALS, Vol. 17, No. 7-8, p. 1004-1011, 2015. Cotatã ISI Thomson Reuters, FI = 0,429. ISSN: 1454-4164

77. ALLOY 5083 (AlMg4.5Mn0.7Cr0.15) OBTAINED USING RAPIDLY SOLIDIFIED MASTER ALLOYS.

By: Gabriel Valeriu Ghica, Mihai Buzatu, Ionut Mircea Petrescu, Gheorghe Iacob* (*corresponding author), Journal of Optoelectronics And Advanced Materials Vol. 17, No. 5-6, May – June 2015, p. 799-805. ISSN: PRINT: 1454 – 4164, ON-LINE: 1841 - 7132, Cotatã ISI, factor impact 2014/2015 – 0,429. WOS:000357766600045.

78. SOLUBILISATION KINETICS OF THE LEAD HYDROXIDE IN ACETIC ACID.

By: Traian Buzatu, Valeriu Gabriel Ghica, Mihai Buzatu, Gheorghe Iacob. REV. CHIM., vol. 66, nr. 2, 2015, pg. 285 - 289. ISSN: 0034-7752, Cotatã ISI, factor impact 2014/2015 – 0,810, WOS:000351659300031.
http://www.revistadechimie.ro/pdf/BUZATU%20T.pdf%202%2015.pdf

79. PROCESSING OXIDIC WASTE OF LEAD-ACID BATTERIES IN ORDER TO RECOVER LEAD.

By: Traian Buzatu, Ionut Mircea Petrescu, Valeriu Gabriel Ghica, Mihai Buzatu, Gheorghe Iacob. Asia-Pacific Journal of Chemical Engineering, vol. 10, issue 1, 2015, pg. 125 – 132. ISSN: 1932-2143. DOI: 10.1002/apj.1854. Cotatã ISI, factor impact 2014/2015 – 0,789, WOS:000348909900012.

80. STUDIES ON WEAR RATE AND MICRO-HARDNESS OF THE Al/Al2O3/Gr HYBRID COMPOSITES PRODUCED VIA POWDER METALLURGY.

By: Gheorghe Iacob, Valeriu Gabriel Ghica, Mihai Buzatu, Traian Buzatu, Ionut Mircea Petrescu. Composites: Part B, vol. 69, 2015, pg. 603–611. ISSN: 1359-8368. DOI information: http://dx.doi.org/10.1016/j.compositesb.2014.07.008. Cotatã ISI, factor impact 2014/2015 – 2,983, WOS: 000347266600068.

81. UTILIZATION OF GRANULATED LEAD SLAG AS A STRUCTURAL MATERIAL IN ROADS CONSTRUCTIONS.

By: Traian Buzatu, Emilia Talpos, Ionut Mircea Petrescu, Valeriu Gabriel Ghica, Gheorghe Iacob, Mihai Buzatu. J Mater Cycles Waste Manag (2015) 17:707–717, ISSN: 1438-4957. DOI information: 10.1007/s10163-014-0297-z, Cotatã ISI, factor impact 2014/2015 – 0,950, WOS:000362520800011

82. EXPERIMENTS ON LIFE CYCLE EXTENSIONS OF GEOTHERMAL TURBINES BY MULTI COMPOSITE TECHNOLOGY.

By: Aurelian Buzãianu, Petra Motoiu, Ioana Csaki, Gabriela Popescu, Kolbrun Ragnarstottir, Sæmundur Guðlaugsson, Daniel Guðmundsson, Adalsteinn Arnbjornsson Geothermics, 57(2015), pp. 1 - 7, 10.1016/j.geothermics 2015.05.001

83. MICROSTRUCTURE EVOLUTION AND TRIBOLOGICAL PROPERTIES FOR NEW AlSi9Cu3/5%GrCu COMPOSITE.

By: P. Moldovan, Ioana CSAKI, G. Popescu, M. Lucaci, M.V. Lungu, M. Butu. Composite Part B, 81, 141 - 148, 2015

84. INVESTIGATION OF MICROSTRUCTURE AND TRIBOLOGICAL PROPERTIES OF Al/Al2O3+Gr HYBRID.

By: M. A. Matara, I. Csaki, G. Popescu, M. Lucaci, M. Lungu. Composite, JOAM, Vol. 17, No. 11-12, November – December 2015, p. 1849 -1854

85. THE MECHANICAL AND CORROSION BEHAVIORS OF As-cast AND Re-melted AlCrCuFeMnNi MULTI-COMPONENT HIGH-ENTROPY ALLOY.

By: Vasile Soare, Dumitru Mitrica, Ionut Constantin, Gabriela Popescu, Ioana Csaki, Mihai Tarcolea, Ioan Carcea.  Metallurgical and Materials Transactions A, ISSN 1073-5623, DOI 10.1007/s1 1661-014-2523-7, FI 1,73, pag.1468-1473.

86. LAYERED STRUCTURES ANALYSIS, WITH HIGH ENTROPY ALLOYS, FOR BALLISTIC PROTECTION. APPLIED MECHANICS AND MATERIALS

By: Chereches, T., Lixandru, P., Geantã, V., Voiculescu, I., Dragnea, D., Stefãnoiu, R. Trans Tech Publications, Switzerland, Vols 809 - 810 (selected, peer reviewed papers from the Innovative Manufacturing Engineering International Conference, ImanE 2015, Iasi, 20 – 22.05.2015), p. 724-729, 2015. ISSN: 1662-7482 DOI: 10.4028/www.scientific.net/AMM.809-810.724

87. Al/Al2O3+Gr HYBRID COMPOSITE COMPACTING BEHAVIOR.

By: Mihaita Adrian Matara, Ioana Csáki, Mariana Lucaci, Magdalena Lungu, Gabriela Popescu, Gheorghe Iacob. Advanced Material Research Vol 1114 (2015) pp 86-91, Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/AMR.1114.86. Indexed by Elsevier: Scopus si Ei Compendex (CPX), Cambridge Scientific Abstracts (CSA), Chemical Abstracts (CA), Google and Google Scholar ISI (ISTP, CPCI, Web of Science), Institution of Electrical Engineers (IEE).

88. RECENT ADVANCES OF THE BASIC CONCEPTS IN GEOTHERMAL TURBINES OF LOW AND HIGH ENTHALPY.

By: Aurelian Buzãianu, Ioana Csáki*, Petra Motoiu, Gabriela Popescu, Ingolfur Thorbjornsson, Kolbrun R. Ragnarsodottir, Sæmundur Guðlaugsson, Daniel Goubmunson,  Advanced Materials Research, Vol 1114, (2015), Trans Tech Publications, Switzerland, doi:10.4028 / www.scientific.net / AMR.1114.233, pp 233-238

89. Ru-BASED BOND COATS USED FOR HIGH TEMPERATURE APPLICATIONS.

By: Amalia SOARE*, Ioana CSÁKI, Cristina OPREA, Sorin SOARE, Cristian PREDESCU, Mirela SOHACIU, Advanced Materials Research Vol 1114 (2015) pp 229-232 , Trans Tech Publications, Switzerland, doi:10.4028 / www.scientific.net / AMR.1114.229

90. Al/Al2O3+Gr HYBRID COMPOSITE COMPACTING BEHAVIOR.

By: Mihaita Adrian Matara, Ioana Csáki, Mariana Lucaci, Magdalena Lungu, Gabriela Popescu*, Gheorghe Iacob. Advanced Materials Research Vol 1114 (2015) pp 86-91, Trans Tech Publications, Switzerland, doi:10.4028/ www.scientific.net /AMR.1114.86

91. EFFICIENCY TOWARDS TRANSPARENCY: THE CASE STUDY OF THE ITALIAN LYRIC-SYMPHONIC FOUNDATIONS.

By: Pollifroni, M., Militaru, Gh., Ioana, A.  Procedia Economics and Finance 27/2015, www.elsevier.com/locate/procedia, Available online at www.sciencedirect.com,doi: 10.1016/S2212-5671(15)00965-X, (22nd International Economic Conference – IECS 2015 “Economic Prospects in the Context of Growing Global and Regional Interdependencies”, IECS 2015), 2015,pg. 4 – 13.

92. CONSTRUCTIVE AND FUNCTIONAL MODERNIZATION OF EAF.

By: Ioana, A., Constantin, N., Moldovan, P.,  IOP Conference Series: Materials Science and Engineering Volume: 85 (International Conference on Applied Sciences - ICAS 2014), doi:10.1088/1757-899X/85/1/012014, 2015, pg. 1-6.

93. ABOUT EAF AND ENVIRONMENT.

By: Ioana, A., Constantin, N., Moldovan, P. IOP Conference Series: Materials Science and Engineering Volume: 85 (International Conference on Applied Sciences - ICAS 2014), doi:10.1088/1757-899X/85/1/012014, 2015, pg. 7-13.

94. HEAT TREATMENT BY APPLYING TEMPERING AT LOW TEMPERATURE OF WNR. 1.2083 STEEL, USED IN THE INJECTION MOLDING OF PBT REINFORCED WITH UP TO 45% FIBERGLASS

By: Alexandru Bran, Nicolae Constantin* University Politehnica of Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania.  MATERIALE PLASTICE 52 No. 4 2015 http://www.revmaterialeplastice.ro pag 533-536, Journal Abbreviation: MATER PLAST, Journal ISSN: 0025-5289, Materiale Plastice Impact Factor 0,824

95. EXPERIMENTAL RESEARCH ON QUALITY FEATURES OF METALLURGICAL COKE

By: Andrei, V., Constantin, N. INTERNATIONAL CONFERENCE ON APPLIED SCIENCES 2014 (ICAS2014) Book Series: IOP Conference Series-Materials Science and Engineering Volume: 85 Article Number: 012001 Published: 2015

96. EXPERIMENTAL RESEARCH ON THE CHARACTERISTICS OF SOFTENING AND MELTING OF IRON ORES AS SIGNIFICANT FACTOR OF INFLUENCE ON GAS PERMEABILITY OF BLAST FURNACE CHARGE

By: Brãnescu, E.; Blãjan, A. O.; Constantin, N. INTERNATIONAL CONFERENCE ON APPLIED SCIENCES 2014 (ICAS2014)Book Series: IOP Conference Series-Materials Science and Engineering Vol: 85 Article Nr: 012001 Published: 2015

97. RESEARCH ON USES PLANT ASHES IN PROCESSING POWDERS FOR CLASSICAL MOULDING OF STEEL.

By: Buzduga, R. V.; Constantin, N.; Lazãr, E. A. INTERNATIONAL CONFERENCE ON APPLIED SCIENCES 2014 (ICAS2014) Book Series: IOP Conference Series-Materials Science and Engineering Volume: 85 Article Number: 012001 Published: 2015.